PDT-740B美国Prostat静态衰变计时器哪家价格好
PDT-740B静态衰变计时器
测量电离器和材料的衰变时间
▶用于测量1000伏电荷在十分之一秒内消散到100、50或10伏以下所需的时间
▶用于评估材料、人员、设备和其他产品的静态衰减能力
▶与大多数便携式充电板监测器和现场仪表兼容，模拟输出为±2伏
▶与PFM-711A或PFM-711B现场仪表一起使用
▶可与PGB-745衰变电极或PRF-911同心环一起使用
Designed to measure the time required for a 1,000 volt charge todissipate to less than 100, 50 or 10 volts in tenths of asecond
Used to evaluate the static decay capabilities of materials,personnel, equipment and other products
Compatible with most portable charge plate monitors and fieldmeters having an analog output of ±2 volts
Used with the PFM-711A or PFM-711B Field Meters
Can be used with the PGB-745 Decay Electrodes or PRF-911Concentric Ring
测量电离器的衰变时间
PDT-740B静态衰变计时器是Prostat创新技术的典型代表，并为专门ESD控制经理和审计员提供支持。
根据ESD协会的电离标准ANSI/ESDSTM3，这种独特的附件设计用于测量电离器从±1000伏到小于100伏的衰减时间。1，并测量小于50伏和小于10伏的材料衰减时间。
评估电离器和包装材料
如果使用得当，PDT-740B可提供衰减时间测量，用于评估电离器、包装材料、鞋类、人员接地、生产辅助设备、一些设备和许多其他ESD控制产品。
与PFK-100B现场仪表组一起使用
PDT-740B静电衰减计时器与Prostat的精密便携式充电板监测器组件一起使用，包括PFM-711B现场仪表、CPM-720B充电板组件和PCS-730B静电充电器。。
使用PGB-745测量材料
为了评估材料和其他产品，建议使用额外的衰变测量附件，例如PGB-745衰变电极或PRF-911同心环夹具。
Measure Decay Time ofIonizers
The PDT-740B Static Decay Timer is typical of Prostat’s innovativetechnology and support of Professional ESD Control Managers andAuditors.
This unique accessory is designed to measure the decay time ofionizers from ±1,000 volts to less than 100 volts in accordancewith ESD Association’s Ionization Standard ANSI/ESD STM3.1, andmeasure material decay time to less than 50 volts and less than 10volts.
Evaluate Ionizers andPackaging Materials
Properly used, the PDT-740B provides decay time measurements forevaluating ionizers, packaging materials, footwear, personnelgrounding, production aids, some equipment and many other ESDcontrol products.
Use it with the PFK-100BField Meter Set
The PDT-740B Static Decay Timer is used with Prostat’s precisionportable Charge Plate Monitor kit components, including thePFM-711B Field Meter, CPM-720B Charge Plate Assembly and PCS-730BElectrostatic Charger..
Measure materials by usingthe PGB-745
For evaluating materials and other products, additional decaymeasurement accessories e.g., PGB-745 Decay Electrodes, or PRF-911Concentric Ring fixtures are recommended.
