中红外光纤光谱仪
产品特点 * 波长范围:5000-1700cm-1 (2-6μm) 6700-1200cm-1 (1.5 - 8.5μm) 5000-830 cm-1 (2-12μm) * 光谱分辨率:4cm-1(2 cm-1、0.5 cm-1可选) * 配置4级TE制冷,高灵敏度检测器 * 高信噪比:>60'000:1 * 可选配中红外光纤CIR(1-6μm),PIR(3-18 μm) | 典型应用 * 激光,光源发光测量 * 固体,溶液,气体的红外光谱分析 * 药品,化妆品,纺织物,农产品等检测 * 复杂、特殊系统红外光谱测量
|
Models | FT-MIR2-6 | FT-MIR 1.5-8.5 | FT-IR2-12 |
Beam-spliter material | CaF2 | ZnSe | |
SpectralRange [cm-1] | 5000- 1700 | 6700- 1200 | 5000- 830 |
SpectralRange [μm] | 2-6 | 1.5-8.5 | 2-12 |
DetectorType | MCT(2-TE cooled) >1x10E11 | MCT(4-TE cooled) >8x10E9 | MCT(4-TE cooled) >2.5x10E9 |
Signal-to-Noise (8cm-1 resolution and 1 min scan time) | >1:60'000 | >1:40'000 | >1:40'000 |
Recommended fiber | CIR(chalcogenide) fibers 1-6μm | CIRor PIR depending of the application | PIR(polycrystalline) fibers 3-18 μm |
Commonspecifications
Interferometertype | Permanentelyaligned, double retro-reflector design |
Resolution[cm-1 ] | 4, 2,optionally 1 and 0.5 |
Wavenumber repetability | <10ppm |
Scanfrequency | 1spectrum/second(in continuous aquisition mode) optionallyup to 8 spectra/second. Depends of resolution |
Controllaser | Temperature-stabilizedsolid-state laser @850nm |
A/DConverter | 24bit |
Operating temperature | 10°C-40°C |
Free-space input | ApertureØ: 12.7mm |
Removable fiber-couplers | Connector:SMA 905 |
Power requirement | 12V /8W |
Communication Interface | USB2.0 |
Software Interface | Windows7/10 |
Dimensions | 180mmx 160mm x 80mm |
Weight | 1800g |